Wool Crush level guide
Wool Crush Level 237 Walkthrough
The main chokepoint in Level 237 is prolonged one-way loop saturation, with the core still near 100% filled deep into the run. Keep progression outer-first and sequence colors instead of flooding. Open green, then yellow, then blue as inner edges appear, and defend the 2:42 congestion peak by pausing new inputs until active chains resolve.
Quick Tips for Level 237 (spoiler-free)
- Use the documented order: green first, yellow second, then blue once the first inner lanes open.
- Respect the long fragile window from 00:57 to 02:45; adding unsupported colors too early creates idle orbiting.
- At 2:42, run a one-rotation no-tap reset if the loop is crowded to prevent endgame stall after 03:51.
How to Solve Wool Crush Level 237 — Full Solution
- Open green lanes from 00:00 on the outer clockwise route to establish continuous pulls.
- Add yellow while green remains active so both colors consume without queue dead time.
- Introduce blue only when new inner edges are visibly exposed per the late-open timing.
- When congestion peaks near 2:42, pause fresh taps and let existing chains clear the loop.
- After about 04:09 when density drops, cycle late-detail colors (blue, yellow, white) to close final scraps.
Colors in this level:
Green, Cyan, Yellow, Brown
Common Mistakes to Avoid
- Not planning the chain reaction: each merge should immediately set up the next one.
- Sliding a block to a temporary spot without confirming it can still reach its match later.
- Ignoring diagonal choke points where two colors' paths cross and block each other.
Frequently Asked Questions
Why is Level 237 still crowded after the early phase?
The source run shows the board staying near full through 03:51, so progress is intentionally slow until inner lanes open close to 04:09.
How do I handle the 2:42 bottleneck in Level 237?
Use a short no-tap cycle. Let active matches drain before injecting new colors, or the one-way loop backlog can lock your late-game options.
What color order should I follow in this level?
The recommended order from input is green to yellow to blue, then a controlled shift to late cleanup colors after the board finally opens.