Wool Crush level guide
Wool Crush Level 303 Walkthrough
Level 303's main chokepoint is keeping the one-way clockwise loop stable while the center remains near 100% packed. Open with pink -> green -> red to peel the outer shell first, then transition once inner edges appear after 04:07. Because the board stays saturated until about 04:37, mistimed injections can orbit without pulling and stall downstream clears.
Quick Tips for Level 303 (spoiler-free)
- Use pink -> green -> red in strict sequence instead of flooding extra colors before one complete match cycle resolves.
- Respect the danger window 01:04-03:05 with a peak near 02:29; if circulation crowds, pause one full rotation and let active matches drain.
- After 04:07, route through pink/brown behind green/brown, then finish with blue-yellow-white cleanup.
How to Solve Wool Crush Level 303 — Full Solution
- At 00:00, open pink first to establish continuous pull on the outer shell lanes.
- Add green while pink is still active so both colors consume in parallel instead of idling in orbit.
- Introduce red after 04:07 when fresh inner edges are exposed and can support deeper routing.
- During 01:04-03:05, especially around 02:29, stop fresh taps briefly and let one full loop cycle drain congestion.
- From about 04:37, rotate late-detail blue, yellow, and white to close final fragments without reloading pressure.
Colors in this level:
Purple, Red, Green, Brown
Common Mistakes to Avoid
- Not planning the chain reaction: each merge should immediately set up the next one.
- Sliding a block to a temporary spot without confirming it can still reach its match later.
- Ignoring diagonal choke points where two colors' paths cross and block each other.
Frequently Asked Questions
Why does Level 303 jam even when my color order seems right?
The center stays crowded through about 04:19, so outer leftovers and newer inner colors can orbit together before one full match cycle clears.
What opening order is safest for Level 303?
Use pink -> green -> red as the first-cycle plan, because this one-way loop rewards layered pulls and punishes random color flooding early.
When should I shift from shell peeling to inner cleanup in Level 303?
Start the inner transition after 04:07 as new edges appear, then push controlled blue-yellow-white cleanup around 04:37.